| Work Piece | |
| Outside diameter min./max. | 50 - 180 mm |
| Module max.* | 4 mm |
| Tool | |
| Hob diameter min./max. | 60 - 100 mm |
| Hob total length min./max. | 200 - 310 mm |
| Hob toothed length max. | 224 mm |
| Hob arbor shaft diameter | 32 mm |
| Thrust bearing short cone ref. Diameter | 25 mm |
| Machine | |
| Hob spindle drive power (S6-60%) | 23 KW |
| Hob spindle revolution range max. | 7000 min.-1 |
| Work piece spindle drive power | 2x 15 KW |
| Work piece spindle revolution range min./max. | 620 min.-1 |
| Axial stroke max. (Z-axis) | 250 mm |
| Radial stroke max. (X-axis) | 140 mm |
| Swivel range of the hob head (A-axis) | +/- 35° |
| Hob shift max. (Y-axis) | 200 mm |
| Max. feed and rapid speeds | |
| axial | 40 m/min. |
| radial | 40 m/min. |
| tangential | 12 m/min. |
| Electric | |
| Total connected load of the basic machine approx | 50 kVA |
| Weight | |
| Weight of the basic machine approx. | 10.000 kg |
| Mounting Area | |
| Basic machine (without chip bucket) approx. | 1900 x 3600 mm |
These methods and angle definitions must be limited if necessary, depending on the work piece and tool dimensions, the gear data and the work piece dependent machine set-up.
*The max. module represents a guiding value. With optimised performance data this value could be increased
