| Work Piece | |
| Outside diameter min./max. | max. 80 mm |
| Module max.* | 2 mm |
| Tool | |
| Hob diameter min./max. | max. 70 mm |
| Hob total length min./max. | 240 – 276 mm |
| Hob toothed length max. | 190 mm |
| Hob arbor shaft diameter | 22 mm |
| Thrust bearing short cone ref. Diameter | 25 mm |
| Machine | |
| Hob spindle drive power (S6-60%) | 8,8 KW |
| Hob spindle revolution range min./max. | 11000 min.-1 |
| Work piece spindle drive power | 2x 500W |
| Work piece spindle revolution range max. | 700 min.-1 |
| Axial stroke max. (Z-axis) | 200 mm |
| Radial stroke max. (X-axis) | 80 mm |
| Swivel range of the hob head (A-axis) |
+/- 35° |
| Hob shift max. (Y-axis) | 170 mm |
| Max. feed and rapid speeds | |
| axial | 30 m/min. |
| radial | 30 m/min. |
| tangential | 30 m/min. |
| Elektric | |
| Total connected load of the basic machine approx | ca. 40 kVA |
| Weight | |
| Weight of the basic machine approx. | 9.000 kg |
| Mounting Area | |
|
Basic machine (without chip bucket) approx. |
1800 x 3800 mm |
These methods and angle definitions must be limited, if necessary, depending on the work piece and tool dimensions, the gear data and the work piece dependent machine set-up.
*The max. module represents a guiding value. With optimised performance data this value could be increased.
